by Jessica Gillette | Aug 19, 2024
MOBILE ELEVATING WORK PLATFORMS (MEWP) TRAINER COURSE
REGISTER HERE
Friday, October 11, 2024 | 8:00AM – 4:00PM
This is a comprehensive training program for Mobile Elevating Work Platforms (MEWP) to prepare employees to train on hazard identification, inspection and safe operating practices back at their facility. Upon completion of this course attendees will have the skills and knowledge necessary to ensure safe work practices and procedures.
Topics Include:
- Inspection of potential work areas for hazards
- Operator Training
- Operator familiarization
- Equipment Pre-start Inspection
- Safe operating practices
- Operator, User, and Owner Responsibilities
Course Includes: Instructor Resource Binder and Mobile Elevating Work Platforms (MEWP) PowerPoint Presentation on USB, lunch and refreshments
Course Flyer
LOCATION
ABC-VA Northern Virginia Training Facility
42680 Trade West Drive, Dulles, VA 20166
COST
Members – $375
Non-Members – $475
SCHEDULE
Please visit CRSC registration link above
by Jessica Gillette | Aug 19, 2024
OSHA 501 – TRAINER COURSE IN OSHA STANDARDS FOR GENERAL INDUSTRY
REGISTER HERE
Offered by Mid Atlantic OTI Education Center, this course will be held at ABC-VA Northern Virginia Training Facility, Host Training Organization
October 7 – 10, 2024 | 8:00AM – 4:00PM
This course is designed for individuals interested in teaching the 10 and 30-hour general industry safety and health Outreach training program to their employees and other interested groups. Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.
Class Topics:
- OSH Act, and OSHA Standards
- Recordkeeping
- Walking & Working Surfaces
- Means of Egress & Fire Protection
- Personal Protective Equipment
- Lockout / Tagout
- Welding, Cutting & Brazing
- Electrical Standards & Work Practices
- Hazard Communication
- Confined Space
- Safety & Health Problems
- Hand & Power Tools
- Outreach Training Program Requirements
- Training Techniques
Student Contact Hours: 26
Prerequisites: Students must successfully complete the OSHA #511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.
Industry OSHA Standards courses (#510, #511, and #5410) must be completed not later than seven (7) years prior to completing the relevant Industry Trainer course (#500, #501, and #5400).
The Prerequisite Verification Form is required to complete the registration process. Click this link Prerequisite Verification Form, or print and send the documentation to our office via email to info@oshamidatlantic.org or fax 410-281-1350
Course Includes: Student binder, OSHA CFR 1910, USB which includes:
- PowerPoint Presentation
- Video clips
- Test Questions
- Additional resource information
LOCATION
ABC-VA Northern Virginia Training Facility
42680 Trade West Drive, Dulles, VA 20166
COST
$845
SCHEDULE
Please visit CRSC registration link above
by Jessica Gillette | Aug 19, 2024
OSHA 511 – OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR GENERAL INDUSTRY
REGISTER HERE
Offered by Mid Atlantic OTI Education Center, this course will be held at ABC-VA Northern Virginia Training Facility, Host Training Organization
August 26 – 29, 2024 | 8:00AM – 4:00PM
This course covers OSHA Standards, policies, and procedures in general industry. Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous. Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.
Student Contact Hours: 26
Prerequisites: None
Course Includes: Student binder, OSHA CFR 1910, Lunch and Refreshments for in-person classes
LOCATION
ABC-VA Northern Virginia Training Facility
42680 Trade West Drive, Dulles, VA 20166
COST
$845
SCHEDULE
Please visit CRSC registration link above
by Jessica Gillette | Aug 7, 2024
24-HOUR COMPETENT PERSON FALL PROTECTION TRAINING
November 19, 20 & 21, 2024 | 7:00AM – 4:00PM
In Accordance with ANSI Standard Z359.2
(Conforms to the 24-Hour Training Requirements of the EM-385-1-1 2014 Edition)
EM385-1-1 requires all Competent Persons who have employees who work at height, to attend a 24-hour class. Federal enforcement of training requirements began September 1, 2016. Section 21 is significantly different from the current OSHA Subpart M and ANSI A10.32 requirements.
This 24-hour training is in accordance with 29CFR 1926 and EM-385-1-1, introducing students to the USACE EM385-1-1 Safety & Health Standards, as well as Virginia and Federal Construction Safety Standards and Regulations covering Fall Protection. This course includes classroom instruction in addition to the required 8-hours of practical hands-on training.
Topics Include:
– An integrated study of hazard recognition and abatement principles related to falls on construction worksites.
– Available equipment, equipment use, maintenance, storage and inspection requirements to maintain compliance
– Basic rescue techniques and emergency action procedures
– The study of compliance issues and challenges facing safety professionals including mishap and case study analysis, Virginia and Federal general safety standards, worksite inspections, interfacing with compliance officials, vertical and horizontal standards, and common construction industry compliance issues are also discussed.
Additional Topics Include:
– Equipment selection, Inspection and Donning
– Fall Prevention/Restraint/Arrest
– Fall Hazard Elimination
– Passive v. Active Systems
– Fall arrest rescue systems
– Selection and usage on non-certified anchorages
– Authorized persons’ duties and responsibilities
– Competent persons’ duties and responsibilities
– Testing of fall protection equipment
– “Hands-On” scenario of fall protection systems
– OSHA and ANSI Standards of Fall Protection
Who Should Attend:
Anyone required to manage a safety program or who is responsible to be the on-site Competent Person, including Safety Managers, Safety Directors, Onsite Managers, Supervisors, Section Leads and Responsible Persons.
What To Bring:
Bring your personal fall protection harness with you to class. Doing so will provide the opportunity to learn how to properly wear your personal equipment you’d like to bring to class, it can be inspected as well (i.e. lifelines, lanyards, anchorages, etc.) Bringing in some of your own gear to class will provide you with practical experience suing your own equipment in addition to the equipment provided in class.
**Class is limited to 15 students.**
LOCATION **PLEASE NOTE OUR NEW ADDRESS**
ABC-VA Hampton Roads Training Facility
530 Independence Parkway, Suite 500 Chesapeake, VA 23320
*Attendee parking and entrance is located in the back of the building.*
COST
Member – $595
Non-Member – $800
SCHEDULE
3-Day Course
November 19, 20 & 21
7:00AM – 4:00PM
Continental breakfast, pre-packaged snacks, coffee/water and boxed lunch provided
CANCELLATION POLICY
Please note that a reservation constitutes a financial commitment unless cancellations are made 48 hours in advance.
Questions?
Contact Jamie Carrow
by Jessica Gillette | Jul 29, 2024
STEP UP: ALL ABOUT STEP + REAL-TIME APPLICATION ASSISTANCE
Thursday, September 5, 2024 | 2:00PM – 3:00PM
Discover why holding a STEP certification is crucial for contractors aiming for excellence in safety standards. After an insightful presentation with ABC’s Senior Director of Safety, benefit from personalized guidance through the online application process with a dedicated mentor, ensuring all your questions are answered in real-time. Don’t miss this opportunity to enhance your safety credentials and gain a competitive edge.
Two ways to participate!
(1) In person – all ABC-VA regions will host the webinar and have mentors available in their respective offices
(2) Online – a GoTo meeting link will be sent to you; a mentor will assist you virtually
This event is highly encouraged for firms submitting to STEP for the first time.
DATE & TIME
Thursday, September 5, 2024
2:00PM – 3:00PM
LOCATION
ABC-VA Northern Virginia: 42680 Trade West Drive, Dulles, VA 20166
ABC-VA Central Virginia: 1600 E Parham Road, Richmond, VA 23228
ABC-VA Hampton Roads: 530 Independence Parkway, Suite 500, Chesapeake, VA 23320
OR Virtual
A GoTo Meeting link will be sent to attendees the day prior to the webinar
COST
Free for ABC members
Questions?
Contact Rob Camlin
