by Jessica Gillette | Aug 25, 2025
OSHA 7505 – INTRODUCTION TO INCIDENT (ACCIDENT) INVESTIGATION
REGISTER HERE
Offered by Mid Atlantic OTI Education Center, this course will be held at ABC-VA Central Virginia Training Facility, Host Training Organization
Monday, November 10, 2025 | 8:00AM – 4:30PM
This course covers an introduction to basic accident investigation procedures and describes accident analysis techniques. Course topics include reasons for conducting accident investigations, employer responsibilities related to workplace accident investigations, and a six step accident investigation procedure. The target audience is the employer, manager, employee or employee representative who is involved in conducting accident and/or near-miss investigations. Upon course completion students will have the basic skills necessary to conduct an effective accident investigation at the workplace.
Prerequisites: None
Course Includes: Student binder
LOCATION
ABC-VA Central Virginia Training Facility
1600 E Parham Road, Richmond, VA 23228
COST
$265
SCHEDULE
Please visit CRSC registration link above
by Jessica Gillette | Aug 25, 2025
OSHA 510 – OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR THE CONSTRUCTION INDUSTRY
REGISTER HERE
Offered by Mid Atlantic OTI Education Center, this course will be held at ABC-VA Central Virginia Training Facility, Host Training Organization
October 27 – 30, 2025 | 8:00AM – 4:00PM
This course covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.
Student Contact Hours: 26
Prerequisites: None
Course Includes: Student binder, OSHA CFR 1926, Lunch and Refreshments
- This course is a prerequisite to the OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry
- This course is a required courses for the Public Sector Safety & Health Fundamentals Certificate Program for Construction
LOCATION
ABC-VA Central VA Training Facility
1600 E Parham Road, Richmond, VA 23228
COST
$845
SCHEDULE
Please visit CRSC registration link above
by Jessica Gillette | Aug 25, 2025
OSHA 30 HOUR COURSE
Begins October 16, 2025 | 8:00AM – 4:00PM
Would you like to learn how OSHA regulations affect your jobsite? Enroll in our OSHA 30-Hour course and prepare yourself for the OSHA inspection you are not expecting. OSHA 30-Hour is structured for anyone in a supervisory position in the construction industry but also provides comprehensive safety training for all workers. Safety training is a necessity in this industry and is increasingly becoming a requirement on many projects. Knowing OSHA regulations ensures jobsite safety and prevents mishaps and OSHA fines. The OSHA 30 Hour Course combines important textual information with relevant, real-life examples from the field and video presentations. Enroll and learn OSHA regulations and receive your OSHA 30-Hour completion card.
INSTRUCTOR
Cebert White
SCHEDULE
4-Session Course: October 16, 17, 23 & 24
8:00AM – 4:00PM
Continental breakfast, pre-packaged snacks, coffee/water and boxed lunch provided
LOCATION
ABC-VA Central Virginia Training Facility
1600 E Parham Road, Richmond, VA 23228
COST
Member – $495
Non-Member – $695
CANCELLATION POLICY
Please note that a reservation constitutes a financial commitment unless cancellations are made 72 hours in advance. Substitutions are welcome at any time if the originally registered individual(s) can no longer attend.
Questions?
Contact Sherrie Dickerson
by Jessica Gillette | Jul 16, 2025
24-HOUR COMPETENT PERSON FALL PROTECTION TRAINING
September 17, 18 & 19, 2025 | 7:00AM – 4:00PM
In Accordance with ANSI Standard Z359.2
(Conforms to the 24-Hour Training Requirements of the EM-385-1-1 2014 Edition)
EM385-1-1 requires all Competent Persons who have employees who work at height, to attend a 24-hour class. Federal enforcement of training requirements began September 1, 2016. Section 21 is significantly different from the current OSHA Subpart M and ANSI A10.32 requirements.
This 24-hour training is in accordance with 29CFR 1926 and EM-385-1-1, introducing students to the USACE EM385-1-1 Safety & Health Standards, as well as Virginia and Federal Construction Safety Standards and Regulations covering Fall Protection. This course includes classroom instruction in addition to the required 8-hours of practical hands-on training.
Topics Include:
– An integrated study of hazard recognition and abatement principles related to falls on construction worksites.
– Available equipment, equipment use, maintenance, storage and inspection requirements to maintain compliance
– Basic rescue techniques and emergency action procedures
– The study of compliance issues and challenges facing safety professionals including mishap and case study analysis, Virginia and Federal general safety standards, worksite inspections, interfacing with compliance officials, vertical and horizontal standards, and common construction industry compliance issues are also discussed.
Additional Topics Include:
– Equipment selection, Inspection and Donning
– Fall Prevention/Restraint/Arrest
– Fall Hazard Elimination
– Passive v. Active Systems
– Fall arrest rescue systems
– Selection and usage on non-certified anchorages
– Authorized persons’ duties and responsibilities
– Competent persons’ duties and responsibilities
– Testing of fall protection equipment
– “Hands-On” scenario of fall protection systems
– OSHA and ANSI Standards of Fall Protection
Who Should Attend:
Anyone required to manage a safety program or who is responsible to be the on-site Competent Person, including Safety Managers, Safety Directors, Onsite Managers, Supervisors, Section Leads and Responsible Persons.
What To Bring:
Bring your personal fall protection harness with you to class. Doing so will provide the opportunity to learn how to properly wear your personal equipment you’d like to bring to class, it can be inspected as well (i.e. lifelines, lanyards, anchorages, etc.) Bringing in some of your own gear to class will provide you with practical experience suing your own equipment in addition to the equipment provided in class.
**Class is limited to 15 students.**
LOCATION
ABC-VA Hampton Roads Training Facility
530 Independence Parkway, Suite 500 Chesapeake, VA 23320
*Attendee parking and entrance is located in the back of the building.*
COST
Member – $595
Non-Member – $800
SCHEDULE
3-Day Course
September 17 – 19, 2025
7:00AM – 4:00PM
Continental breakfast, pre-packaged snacks, coffee/water and boxed lunch provided
CANCELLATION POLICY
A reservation constitutes a financial commitment unless cancellations are made 48 hours in advance. If you do not cancel within the required time or do not show up for or complete the course, you will be financially responsible.
Questions?
Contact Jamie Carrow
by Jessica Gillette | Jul 8, 2025
OSHA 502 – UPDATE FOR CONSTRUCTION INDUSTRY OUTREACH TRAINERS
REGISTER HERE
Offered by Mid Atlantic OTI Education Center, this course will be held at ABC-VA Northern Virginia Training Facility, Host Training Organization
January 5 – 7, 2026 | 8:00AM – 4:00PM
This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program. The course provides an update on OSHA Construction Standards, policies, and regulations. Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes.
Student Contact Hours: 18
Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry. Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status. Please note: Copies of Course Certificates will not be accepted as proof of successful completion.
The Prerequisite Verification Form is required to complete the registration process. Click this link Prerequisite Verification Form print and send the documentation to our office via email to info@oshamidatlantic.org or fax 410-281-1350
Registration for courses requiring a Prerequisite Verification Form (PVF)—including OSHA #500, #501, #502, #503, #5400, and #5402—is not confirmed until the PVF is approved. Forms must be submitted by the close of business on the Tuesday one week before the course starts. Late submissions may be accepted at MAOTIEC’s discretion.
Those currently enrolled in or who have completed OSHA #510, #511, or #5410 are encouraged to submit their PVF promptly.
Course Includes: Student binder, OSHA CFR 1926, USB which includes:
- PowerPoint Presentation
- Video clips
- Test Questions
- Additional resource information
LOCATION
ABC-VA Northern Virginia Training Facility
42680 Trade West Drive, Dulles, VA 20166
COST
$795
SCHEDULE
Please visit CRSC registration link above
